Our products and solutions
Product Categories
Standards
- Model no. 1720
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The purpose of this tester is to apply and maintain the correct hydrostatic pressure for internal pressure creep tests. Bursting pressure tests can also be optionally performed.
Up to 9 modules – equivalent to 45 stations.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1814
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The purpose of this tester is to apply and maintain the correct hydrostatic pressure for internal pressure creep tests.
Available from July!Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1774
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
For mid-level testing demands, the Airless BlueLine ensures pressure control at maximum adjustment precision and consistency.
Up to 5 modules – equivalent to 25 stations.Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1718
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The burst pressure tester for pipes with large diameters is a further milestone for burst tests on large-volume samples.
Standards
- ASTM D 1599
- Model no. 1790
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The 1790 Airless LightLine full set, with its five pressure stations and test bath, provide a simple all-in-one solution. The operation, evaluation of the results and clear visualization is done via a laptop.
Standards
- ISO 1167
- ASTM D 1598
- Model no. 1799
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The 1799 full set combines five pressure stations and a test bath in a single housing.
Standards
- ISO 1167
- Model no. 1785
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
Our BasicLine product version has been specifically developed for flexible laboratory applications where compact design and mobility are key priorities. The system is small, space-saving, and easily movable – making it ideal for laboratories with limited space or changing locations.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1751 - 1757
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1830 - 1840
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The creep internal pressure test is a test method for determining the strength of thermoplastic pipes.
Available from July!
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1678
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The IPT test tank for internal pressure creep testing is characterised by state-of-the-art technology, maximum safety and optimised heating power with very low energy consumption.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1765
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The main field of application for the 1765 series cooling units is to maintain the water temperature in our test tanks at 20°C.
Standards
- ISO 1167
- ISO 10508
- ISO 19893
- ASTM D 1598
- ASTM D 1599
- EN 12293
- Model no. 1821
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
This innovative testing procedure ensures dependable assessment of structural integrity and connection strength, even for pipe sizes up to DN 630.
Available from 2027!
Standards
- ISO/CD 19521-1
- ISO/CD 19521-2
- Model no. 1662/1674
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The test ovens are specially designed for testing thermoplastic pipes and fittings.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1776
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The test ovens are specially designed for testing thermoplastic pipes and fittings.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1618
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
For burst pressure tests up to 200 bar on plastic fittings with inside diameter up to 160 mm with 3-dimensional loading.
Standards
- ASTM D 1599
- Model no. 1623
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
For burst pressure tests up to 200 bar on injection moulded fittings with diameters 16 – 110 mm.
Standards
- ASTM D 1599
- Model no. 1810
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The end clolsures model 1810 are designed for the quick sealing of plastic pipes up to DN 2700 mm and are characterised by easy handling – simple, brilliant and inexpensive.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1732/1733
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes to constant hydrostatic internal pressure at a constant ambient temperature.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1735/1736
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes to constant hydrostatic internal pressure at a constant ambient temperature.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1685
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes when exposed to constant hydrostatic internal pressure at
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1634
- Tests on finished products
For fittings with a diameter of up to 110 mm, suitable for the IPT burst chamber model 1623. The fittings are only for use in a burst chamber.
Standards
- ASTM D 1599
- Model no. 1280
- Tests on finished products
Model 1280 heating pipe closures are used to close underfloor heating pipes, even at high test temperatures of up to 130°C.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1684
- Tests on finished products
The mounting aid for pipe samples is designed to facilitate the mounting and dismounting of endclosures for instance (models 1810 and 1784).
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1751 - 1757
- Tests on finished products
Different accessories are required for the various test methods used to determine the strength of thermoplastic pipes.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1796/1797
- Tests on finished products
- Additional testing equipment
The IPT servo pulsator was specially developed to determine the behaviour of pipes and pipe connections during pressure surge testing.
Standards
- ISO 19892
- EN 12295
- DVGW W 543
- Model no. 1766
- Tests on finished products
For carrying out dynamic internal pressure tests on pipes and pipe components with sinusoidal or linear pressure curves up to 400 bar.
Standards
- EN 12295
- DVGW W 543
- DVGW W 534
- Model no. 1769
- Tests on finished products
- Additional testing equipment
The temperature cycling test device is used to evaluate the resistance of joints in thermoplastic piping systems to temperature change stresses. Temperatures of up to 114 °C enable realistic testing conditions to ensure safety and reliability.
Standards
- ISO 10508
- DVGW W 542
- DVGW W 543
- DVGW W 534
- Model no. 1770
- Tests on finished products
- Additional testing equipment
The temperature change tester allows you to determine the resistance of connections for pipe systems with rigid or flexible thermoplastic pipes to temperature changing stress.
Standards
- DVGW W 534
- DVGW W 543
- DVGW W 542
- ISO 19892
- EN 12293
- Model no. 1777
- Tests on finished products
- Additional testing equipment
The temperature cycling test device evaluates the resistance of joints in thermoplastic piping systems with rigid or flexible pipes to temperature change stresses. It is designed for systems used in pressurized hot and cold water applications.
Standards
- ISO 10508
- EN 12293
- DVGW W 542
- DVGW W 543
- DVGW W 534
- Model no. 1268
- Tests on finished products
- Additional testing equipment
This test determines the resistance of pipe system connections to thermal cycling
Standards
- EN 1055
- Model no. 1772
- Tests on finished products
- Additional testing equipment
The load box is an extension of the temperature cycling tester for waste water.
Standards
- ISO 13260
- Model no. 1656
- Tests on finished products
Pressure test unit for test leakage on plastic pipes in series production up to max. diameter D 32 mm and a max. sample lenght of 500 meters.
Standards
- UNI 9349
- Model no. 1679
- Tests on finished products
The oxygen increase is measured in a system of which the test piece forms part.
Standards
- ISO 17455
- Model no. 1730
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
Whether in quality assurance, laboratory environments, or production – the 1730 delivers reproducible, standards-compliant results and ensures maximum process reliability.
Standards
- ISO 3503
- DVGW W 543
- Model no. 1663/1669
- Tests on finished products
- Additional testing equipment
With the model 1663 and 1669 testers, the ring stiffness, ring flexibility and creep behaviour of thermoplastic pipes can be determined.
Standards
- ISO 9967
- ISO 9969
- ISO 13968
- DIN 16961-2
- ASTM D 2412
- Model no. 1771
- Tests on finished products
- Additional testing equipment
The combi test stand is used to perform leak tests on pipe connections.
Standards
- ISO 13254
- ISO 13259
- Model no. 1351
- Tests on finished products
- Additional testing equipment
The combi test stand 1351 is used to carry out leak tests on waste water pipe systems in the diameter range DN 40 to DN 400.
Standards
- ISO 13254
- ISO 13259
- Model no. 1800
- Tests on finished products
- Additional testing equipment
The methylene chloride tester model 1800 is used for material testing of extruded profiles and pipes made of rigid PVC (e.g. pipes) in accordance with ISO 9852 or EN 580.
Standards
- ISO 9852
- Model no. 1802
- Tests on finished products
- Additional testing equipment
The Chlorine Testing Device Model 1802 is a modern system for long-term testing of plastic pipes under chlorinated conditions.
Standards
- NSF P 171
- ASTM F 1281
- ASTM F 1282
- ASTM F 2330
- ASTM F 2262
- ASTM F 2263
- ASTM F 2023
- Model no. 1598
- Tests on finished products
- Tests on raw materials
The tensile creep tester is used to determine the stress crack resistance of samples with a circumferential notch (FNCT – Full Notch Creep Test) under media influence.
Standards
- ISO 16770
- Model no. 1727
- Tests on finished products
- Tests on raw materials
The tensile creep tester is intended for determining the resistance of plastic samples during a tensile creep test.
Standards
- ISO 16770
- Model no. 1719
- Tests on finished products
- Tests on raw materials
The tensile creep tester is used to determine the stress crack resistance of samples with a circumferential notch (FNCT – Full Notch Creep Test) under media influence.
Standards
- ISO 16770
- Model no. 1775
- Tests on finished products
- Additional testing equipment
The resistance of pipes to slow crack growth under external point loads can be determined using a point load test.
Standards
- PAS 1075
- Model no. H3006
- Tests on finished products
- Additional testing equipment
- Tests on raw materials
ISO 10147 stipulates that test samples made from crosslinked polyethylene (PE-X) must be stored in a specified, boiling solvent for a specific period of time and that the percent by weight of insoluble material is then measured.
Standards
- ISO 10147
- ASTM D 2765 Method B
- DIN 16892
- Model no. H3013
- Tests on finished products
- Additional testing equipment
The tester is used to determine the Vicat softeningtemperature and the heat resistance temperature under load for plastics and thermoplastics.
Standards
- ISO 2507
- ISO 306
- ISO 75
- ASTM D 1525
- ASTM D 648
- Model no. H3016
- Tests on finished products
- Additional testing equipment
The universal tensile tester is used for performing tension, pressure or bending tests. The classic application is the tensile test. This involves subjecting a sample to an increasing tensile load until it breaks.
Standards
- ISO 6259
- ASTM D 638
- Model no. 1713
- Tests on finished products
- Impact and Drop-Test-Equipment
The falling weight tester is used to determine the external impact resistance of thermoplastic pipes using the staircase or round-the-clock method.
Standards
- ISO 11173
- ISO 3127
- ASTM D 2444
- Model no. 1654
- Tests on finished products
- Impact and Drop-Test-Equipment
You can test packaging of varying shapes and sizes for impact stress after free fall using IPT’s drop testers.
Standards
- ASTM D 2463
- Model no. 1529/1543
- Tests on finished products
- Impact and Drop-Test-Equipment
You can test packaging of varying shapes and sizes for impact stress after free fall using IPT’s drop testers. The packaging can be tested with its content and may consist of cans, barrels and boxes.
Standards
- ASTM D 2463
- Model no. 1523
- Tests on finished products
- Impact and Drop-Test-Equipment
You can test packaging of varying shapes and sizes for impact stress after free fall using IPT’s drop testers.
Standards
- ASTM D 2463
- Model no. 1572
- Tests on finished products
- Impact and Drop-Test-Equipment
With the increasing popularity of plastic window and door profiles, the demands on the material have also increased in recent years, particularly in terms of load-bearing capacity and durability.
Standards
- EN 477
- RAL GZ 716/1
- Model no. 1671
- Tests on finished products
- Tests on raw materials
The RCP-S4 tester model 1671 is developed to perform tests on pipes up to DN 630.
Standards
- ISO 13477
- Model no. 1629
- Tests on finished products
- Tests on raw materials
The tester model 1629 is used to determine the resistance of plastic pipes to rapid crack propagation under internal overpressure and low temperatures in accordance with ISO 13477 (Rapid Crack Propagation).
Standards
- ISO 13477
- Model no. H3018
- Tests on finished products
- Impact and Drop-Test-Equipment
The pendulum impact tester enables testing across the entire spectrum of plastic impact testing, Charpy, Izod, impact and Dynstat in accordance with ISO and ASTM standards.
Standards
- ISO 179
- ISO 180
- ISO 8256-A
- ASTM D 256
- ASTM D 4812
- ASTM D 6110
- DIN 53435