Our products and solutions

Product Categories

Standards

AIRLESS PROFESSIONALLINE

Model no. 1720

Tests on finished products
Internal hydrostatic and quick burst test equipment

The purpose of this tester is to apply and maintain the correct hydrostatic pressure for internal pressure creep tests. Bursting pressure tests can also be optionally performed. Up to 9 modules – equivalent to 45 stations.

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

AIRLESS ADVANCED

Model no. 1814

Tests on finished products
Internal hydrostatic and quick burst test equipment

The purpose of this tester is to apply and maintain the correct hydrostatic pressure for internal pressure creep tests.

Available from July!

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

AIRLESS BLUELINE

Model no. 1774

Tests on finished products
Internal hydrostatic and quick burst test equipment

For mid-level testing demands, the Airless BlueLine ensures pressure control at maximum adjustment precision and consistency.

Up to 5 modules – equivalent to 25 stations.

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

BURST TESTER FOR PIPES WITH LARGE DIAMETERS

Model no. 1718

Tests on finished products
Internal hydrostatic and quick burst test equipment

The burst pressure tester for pipes with large diameters is a further milestone for burst tests on large-volume samples.

Standards

ASTM D 1599

Airless LightLine

Model no. 1790

Tests on finished products
Internal hydrostatic and quick burst test equipment

The 1790 Airless LightLine full set, with its five pressure stations and test bath, provide a simple all-in-one solution. The operation, evaluation of the results and clear visualization is done via a laptop.

Standards

ISO 1167
ASTM D 1598

AIRLESS BASICLINE

Model no. 1785

Tests on finished products
Internal hydrostatic and quick burst test equipment

Our BasicLine product version has been specifically developed for flexible laboratory applications where compact design and mobility are key priorities. The system is small, space-saving, and easily movable – making it ideal for laboratories with limited space or changing locations.

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

Test Tanks

Model no. 1751 - 1757

Tests on finished products
Internal hydrostatic and quick burst test equipment

The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes.

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

TEST TANKS

Model no. 1830 - 1840

Tests on finished products
Internal hydrostatic and quick burst test equipment

The creep internal pressure test is a test method for determining the strength of thermoplastic pipes. Available from July!

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

TEST TANKS

Model no. 1678

Tests on finished products
Internal hydrostatic and quick burst test equipment

The IPT test tank for internal pressure creep testing is characterised by state-of-the-art technology, maximum safety and optimised heating power with very low energy consumption.

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

CHILLER

Model no. 1765

Tests on finished products
Internal hydrostatic and quick burst test equipment

The main field of application for the 1765 series cooling units is to maintain the water temperature in our test tanks at 20°C.

Standards

ISO 1167
ISO 10508
ISO 19893
ASTM D 1598
ASTM D 1599
EN 12293

Test oven

Model no. 1662/1674

Tests on finished products
Internal hydrostatic and quick burst test equipment

The test ovens are specially designed for testing thermoplastic pipes and fittings.

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

Test oven

Model no. 1776

Tests on finished products
Internal hydrostatic and quick burst test equipment

The test ovens are specially designed for testing thermoplastic pipes and fittings.

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

BURST CHAMBER FOR FITTINGS

Model no. 1618

Tests on finished products
Internal hydrostatic and quick burst test equipment

For burst pressure tests up to 200 bar on plastic fittings with inside diameter up to 160 mm with 3-dimensional loading.

Standards

ASTM D 1599

BURST CHAMBER FOR FITTINGS

Model no. 1623

Tests on finished products
Internal hydrostatic and quick burst test equipment

For burst pressure tests up to 200 bar on injection moulded fittings with diameters 16 – 110 mm.

Standards

ASTM D 1599

END CLOSURES 100 BAR

Model no. 1810

Tests on finished products
Internal hydrostatic and quick burst test equipment

The end clolsures model 1810 are designed for the quick sealing of plastic pipes up to DN 2700 mm and are characterised by easy handling – simple, brilliant and inexpensive.

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

QUIX END CLOSURES 100 BAR

Model no. 1732/1733

Tests on finished products
Internal hydrostatic and quick burst test equipment

The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes to constant hydrostatic internal pressure at a constant ambient temperature.

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

QUIX END CLOSURES 200 BAR

Model no. 1735/1736

Tests on finished products
Internal hydrostatic and quick burst test equipment

The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes to constant hydrostatic internal pressure at a constant ambient temperature.

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

END CLOSURES WITH TIE ROD

Model no. 1685

Tests on finished products
Internal hydrostatic and quick burst test equipment

The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes when exposed to constant hydrostatic internal pressure at

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

END CLOSURES FOR BURST TESTS

Model no. 1634

Tests on finished products

For fittings with a diameter of up to 110 mm, suitable for the IPT burst chamber model 1623. The fittings are only for use in a burst chamber.

Standards

ASTM D 1599

END CLOSURES FOR FLOOR HEATING

Model no. 1280

Tests on finished products

Model 1280 heating pipe closures are used to close underfloor heating pipes, even at high test temperatures of up to 130°C.

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

MOUNTING AID

Model no. 1684

Tests on finished products

The mounting aid for pipe samples is designed to facilitate the mounting and dismounting of endclosures for instance (models 1810 and 1784).

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

TEST TANK ACCESSORIES

Model no. 1751 - 1757

Tests on finished products

Different accessories are required for the various test methods used to determine the strength of thermoplastic pipes.

Standards

ISO 1167
ASTM D 1598
ASTM D 1599

RING STIFFNESS TESTERS

Model no. 1663/1669

Tests on finished products
Additional testing equipment

With the model 1663 and 1669 testers, the ring stiffness, ring flexibility and creep behaviour of thermoplastic pipes can be determined.

Standards

ISO 9967
ISO 9969
ISO 13968
DIN 16961-2
ASTM D 2412

Chlorine Testing Device

Model no. 1802

Tests on finished products
Additional testing equipment

The Chlorine Testing Device Model 1802 is a modern system for long-term testing of plastic pipes under chlorinated conditions.

Standards

NSF P 171
ASTM F 1281
ASTM F 1282
ASTM F 2330
ASTM F 2262
ASTM F 2263
ASTM F 2023

BULK DENSITY TESTER

Model no. 1132

Tests on raw materials

The device for determining bulk density is a simple and reliable option for checking the uniform structure of moulding compounds.

Standards

ISO 60
ASTM D 1895

POURABILITY TESTER

Model no. 1326

Tests on raw materials

Poor plastic flow properties can cause the flow of material in the funnel of the processing machine to slow down and even stop.

Standards

ISO 6186
ASTM D 1895

MFR/MVR TESTER

Model no. 1709

Tests on raw materials

The 1709 MFR/MVR tester is used to determine the melt flow rate of thermoplastics.

Standards

ISO 1133
ASTM D 1238

CARBON BLACK CONTENT TESTER

Model no. 1398

Tests on raw materials

Standards stipulate the determination of the carbon black content of polyolefins and/or also the residue on ignition of carbon blacks.

Standards

ISO 6964
ASTM D 1895

ESCR TESTER

Model no. 1692

Tests on raw materials

ASTM D1693 is a test method for determining environmental stress crack resistance (ESCR) in ethylene plastics.

Standards

ASTM D 1963

DETERMINING OF THE DEGREE OF CROSSLINKING

Model no. H3006

Tests on finished products
Additional testing equipment
Tests on raw materials

ISO 10147 stipulates that test samples made from crosslinked polyethylene (PE-X) must be stored in a specified, boiling solvent for a specific period of time and that the percent by weight of insoluble material is then measured.

Standards

ISO 10147
ASTM D 2765 Method B
DIN 16892

VICAT/HDT TESTER

Model no. H3013

Tests on finished products
Additional testing equipment

The tester is used to determine the Vicat softeningtemperature and the heat resistance temperature under load for plastics and thermoplastics.

Standards

ISO 2507
ISO 306
ISO 75
ASTM D 1525
ASTM D 648

UNIVERSAL TENSILE TESTER

Model no. H3016

Tests on finished products
Additional testing equipment

The universal tensile tester is used for performing tension, pressure or bending tests. The classic application is the tensile test. This involves subjecting a sample to an increasing tensile load until it breaks.

Standards

ISO 6259
ASTM D 638

FALLING WEIGHT TESTER

Model no. 1713

Tests on finished products
Impact and Drop-Test-Equipment

The falling weight tester is used to determine the external impact resistance of thermoplastic pipes using the staircase or round-the-clock method.

Standards

ISO 11173
ISO 3127
ASTM D 2444

ZERO°C TEST TANK

Model no. 1763

Sample preparation

For conditioning samples for impact and drop tests with a water depth of up to 1,000 mm.

Standards

ISO 11173
ISO 3127
ASTM D 2444
EN 477

IMPACT DROP TESTER FOR PACKAGING

Model no. 1654

Tests on finished products
Impact and Drop-Test-Equipment

You can test packaging of varying shapes and sizes for impact stress after free fall using IPT’s drop testers.

Standards

ASTM D 2463

IMPACT DROP TESTERS FOR PACKAGING

Model no. 1529/1543

Tests on finished products
Impact and Drop-Test-Equipment

You can test packaging of varying shapes and sizes for impact stress after free fall using IPT’s drop testers. The packaging can be tested with its content and may consist of cans, barrels and boxes.

Standards

ASTM D 2463

IMPACT DROP TESTER FOR PACKAGING

Model no. 1523

Tests on finished products
Impact and Drop-Test-Equipment

You can test packaging of varying shapes and sizes for impact stress after free fall using IPT’s drop testers.

Standards

ASTM D 2463

Spiral pipe cutter

Model no. 1411

Sample preparation

To determine the delamination between the different material layers of cross-linked polyethylene pipes, samples up to a diameter of 32 mm can be produced.

Standards

ASTM F 1281
ASTM D 1282

CNC TEST BAR MILLING MACHINE

Model no. 1812

Sample preparation

The CNC test bar milling machine enables bar-shaped plastic samples to be produced for tension, pressure, bending and flexural impact tests in accordance with a wide range of standards.

Standards

ISO 527
ISO 6259
ASTM D 638
ISO 179
ISO 180
ISO 16770
ASTM D 1822

CNC TEST BAR MILLING MACHINE

Model no. 1843

Sample preparation

The CNC test bar milling machine enables bar-shaped plastic samples to be produced for tension, pressure, bending and flexural impact tests in accordance with a wide range of standards.

Standards

ISO 527
ISO 6259
ASTM D 638
ISO 179
ISO 180
ISO 16770
ASTM D 1822

LABORATORY GRANULATOR

Model no. 1665

Sample preparation

The laboratory granulator was developed for the production of granulates from plastic pipe slices or plastic sheets, for example for the determination of MFR/MVR values.

Standards

ISO 1133
ISO 1183
ASTM D 1505

LABORATORY SIEVING MACHINE

Model no. H3001

Tests on raw materials

The digital laboratory sieving machine allows you to easilyand accurately determine the fineness and particle size distribution of all dust-like, powdery or granular products.

Standards

ISO 2395
ISO 3310
ISO 565
DIN 66165
ASTM D 1921
ASTM E 11

DETERMINATION OF DENSITY OF PLASTICS

Model no. H3002

Tests on raw materials

This tester is used to determine the density of plastics according to the buoyancy method. The complete set consists of a beaker, thermometer, glass plummet for determining the liquid density, submerged filter and submerged contactor.

Standards

ISO 1183
ASTM D 792

Determination of water absorption

Model no. H3005

Tests on raw materials

A water absorption testing device according to ISO 8361 is used to determine the water absorption capacity of porous materials under defined conditions. It enables controlled exposure of the sample to water over a specified period and under standardized environmental parameters.

Standards

ISO 62
ASTM D 570

ROTATIONAL MICROTOME

Model no. H3009

Sample preparation

The microtome is used to cut very thin slices from a sample material in order to subsequently assess the degree of pigment and carbon black dispersion in polyolefin pipes and fittings.

Standards

ISO 18553
ASTM D 5596

CIRCOMETER

Model no. H3017

Measuring devices

Circometers are the easiest way to determine the outside diameter of pipes ranging from 15 to 3100 mm.

Standards

ISO 3126
ASTM D 2122

PENDULUM IMPACT TESTER

Model no. H3018

Tests on finished products
Impact and Drop-Test-Equipment

The pendulum impact tester enables testing across the entire spectrum of plastic impact testing, Charpy, Izod, impact and Dynstat in accordance with ISO and ASTM standards.

Standards

ISO 179
ISO 180
ISO 8256-A
ASTM D 256
ASTM D 4812
ASTM D 6110
DIN 53435

Shore hardness tester

Model no. H3020

Tests on raw materials

Shore hardness describes a material’s resistance to the penetration of an indenter under a defined force and is expressed on a scale from 0 to 100.

Standards

ISO 7619
ISO 868
ASTM D 2240

MICROSCOPE AND DIGITAL CAMERA

Model no. H3022

Tests on raw materials

According to the method for the assessment of the degree of pigment and carbon black dispersion in polyolefin pipes, fittings and compounds, a microscope is required to examine the particles and agglomerates in the test sample.

Standards

ISO 18553
ASTM D 5596

COOLING CHAMBER

Model no. H3026

Sample preparation

The walk-in cooling chamber is used to condition specimens to the preset temperature.

Standards

ISO 11173
ISO 13477
ISO 3127
ASTM D 2444