Our products and solutions
Product Categories
Standards
- Model no. 1720
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The purpose of this tester is to apply and maintain the correct hydrostatic pressure for internal pressure creep tests. Bursting pressure tests can also be optionally performed.
Up to 9 modules – equivalent to 45 stations.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1814
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The purpose of this tester is to apply and maintain the correct hydrostatic pressure for internal pressure creep tests.
Available from July!Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1774
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
For mid-level testing demands, the Airless BlueLine ensures pressure control at maximum adjustment precision and consistency.
Up to 5 modules – equivalent to 25 stations.Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1718
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The burst pressure tester for pipes with large diameters is a further milestone for burst tests on large-volume samples.
Standards
- ASTM D 1599
- Model no. 1790
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The 1790 Airless LightLine full set, with its five pressure stations and test bath, provide a simple all-in-one solution. The operation, evaluation of the results and clear visualization is done via a laptop.
Standards
- ISO 1167
- ASTM D 1598
- Model no. 1799
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The 1799 full set combines five pressure stations and a test bath in a single housing.
Standards
- ISO 1167
- Model no. 1785
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
Our BasicLine product version has been specifically developed for flexible laboratory applications where compact design and mobility are key priorities. The system is small, space-saving, and easily movable – making it ideal for laboratories with limited space or changing locations.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1751 - 1757
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1830 - 1840
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The creep internal pressure test is a test method for determining the strength of thermoplastic pipes.
Available from July!
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1678
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The IPT test tank for internal pressure creep testing is characterised by state-of-the-art technology, maximum safety and optimised heating power with very low energy consumption.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1765
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The main field of application for the 1765 series cooling units is to maintain the water temperature in our test tanks at 20°C.
Standards
- ISO 1167
- ISO 10508
- ISO 19893
- ASTM D 1598
- ASTM D 1599
- EN 12293
- Model no. 1821
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
This innovative testing procedure ensures dependable assessment of structural integrity and connection strength, even for pipe sizes up to DN 630.
Available from 2027!
Standards
- ISO/CD 19521-1
- ISO/CD 19521-2
- Model no. 1662/1674
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The test ovens are specially designed for testing thermoplastic pipes and fittings.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1776
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The test ovens are specially designed for testing thermoplastic pipes and fittings.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1618
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
For burst pressure tests up to 200 bar on plastic fittings with inside diameter up to 160 mm with 3-dimensional loading.
Standards
- ASTM D 1599
- Model no. 1623
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
For burst pressure tests up to 200 bar on injection moulded fittings with diameters 16 – 110 mm.
Standards
- ASTM D 1599
- Model no. 1810
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The end clolsures model 1810 are designed for the quick sealing of plastic pipes up to DN 2700 mm and are characterised by easy handling – simple, brilliant and inexpensive.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1732/1733
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes to constant hydrostatic internal pressure at a constant ambient temperature.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1735/1736
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes to constant hydrostatic internal pressure at a constant ambient temperature.
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1685
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes when exposed to constant hydrostatic internal pressure at
Standards
- ISO 1167
- ASTM D 1598
- ASTM D 1599
- Model no. 1730
- Tests on finished products
- Internal hydrostatic and quick burst test equipment
Whether in quality assurance, laboratory environments, or production – the 1730 delivers reproducible, standards-compliant results and ensures maximum process reliability.
Standards
- ISO 3503
- DVGW W 543